DC Battery Specialists

DC Battery Specialists
7415 N.E. 1st Place
Miami, Florida 33138

Phone: 305-758-5041
Fax: 305-758-3469



Page Top

Outback FLEXmax FM60 Model FM60-150VDC

Outback Power Systems Logo

Outback Power Systems FM60 Charge Controller

The FLEXmax FM60 charge controllers are the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Systems. The innovative FLEXmax MPPT software algorithm in the FLEXmax FM60 is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, the FLEXmax FM60 charge controllers can operate at their full maximum current rating of 60 Amps, in ambient temperatures as high as 104°F (40°C).

Included in the Outback Power Systems FM60 Charge Controllers are the revolutionary features first developed by OutBack Power, including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. You can wire your array up to 60 volts and feed a 12, 24, 36 or 48 volt battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button. The integrated OutBack network communications allows the FM60 Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled complete system integration.

Outback Power Systems FM60 Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.

Outback Power Systems FM60 (Flexmax 60) MPPT Charge Controller Specifications:

  • Nominal Battery Voltages: 12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up)
  • Maximum Output Current: 60 amps @ 104° F (40°C) with adjustable current limit
  • Maximum Solar Array STC Nameplate: 12 VDC systems 900 Watts / 24 VDC systems 1800 Watts / 48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts
  • PV Open Circuit Voltage (VOC): 150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum
  • Standby Power Consumption: Less that 1 Watt typical
  • Power Conversion Efficency: 98.1% @ 60 Amps in at 48 VDC System voltage - Typical
  • Charging Regulation: Five Stages: Bulk, Absorption, Float, Silent and Equalization
  • Voltage Regulation Set points: 10 to 60 VDC user adjustable with password protection
  • Equalization Charging: Programmable Voltage Setpoint and Duration - Automatic Termination when completed
  • Battery Temperature Compensation: Automatic with optional RTS installed
  • Voltage Step-Down Capability : Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDCinput
  • Status Display : 3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total
  • Remote Display and Controller :Optional Mate or Mate2 with RS232 Serial Communications Port
  • Network Cabeling : Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable
  • Data Logging : Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float , Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production.
  • Warranty: Standard 5 year
  • Weight 11.65 lb
  • Shipping Weight 14.55 lb
  • Dimensions: 13.5 x 5.75 x 4"(H x W x D)
  • Options : Remote Temperature Sensor (RTS), HUB 4, HUB 10, MATE, MATE 2

Download The FLEXmax 60 (FM60) & FLEXmax 80 MPPT Specifications Sheet **
( ** Click to download and save on your computer. PDF format. Adobe Acrobat viewer required for viewing.)

Graphic: Acrobat Logo

Return To Outback Power Systems Charge Controllers

Outback Power Systems Inverters

Page Top